WORKING PRINCIPLE:
1. Basic gyratory motion is similar to artificial screening. Eccentricity is adjustable from 25 to 40mm, low-speed V-belt drive is adjustable from 120 to 360rpm
2. Each product’s dwell time can be adjusted by the radial of swing screen and the angle towards the direction of drive axis.
The process is repeated in each screen deck.
3. Therefore, establishing the horizontal and throwing three-dimensional rolling movement, materials are evenly dispersed on the entire screen surface from the center to the outer edge, and thus spread towards the axis by spiral movement. Small particles finished screening process.
4. The horizontal and vertical acceleration are increased with the movement of the particles, and then the particles which are close to wire mesh size will be successfully separated; The larger particles are transported to the exit, the flow can be controlled by a regulated oriented device at the exit, the oriented device is another factor which controls the dwell time of the materials.
5. The process repeated on each screen deck.
CHARACTERISTIC:
1 Basic rotary motion is similar to artificial sieving, eccentricity ratio is adjustable from 25 to 40mm, low speed V-belt drive is adjustable from 120 to 360rpm.
2 5 times output per unit area than normal vibrating scree.
3 Accurate to six grade screening.
4 Screening efficiency ≥95%.
5 Use silicone balls, rubber balls, ultrasonic and drum brush for clearing mesh cloth.
6 Mesh cloth not blocked, closed dustproof, safe operation.
7 Accelerated speed is lower than the average 4.5 times vibrating screen.
8 Longer life time of small parts.
9 Noise <75 dB
10 Optimization of gravity balance, foundation dynamic load is low.
APPLICATION:
Salt,EPS, citric acid, metallic silicon, glass powder, aluminum hydroxide, fertilizer, cellulose, crumb rubber, mineral etc.